Some of us here at AMERiders already knew some of the information FortNine gives us in this video. Regardless it is still great information to have about DOT helmets, and FortNine strikes another one out of the park with it.
Forewarned is forearmed, as they say, so read through this and watch the video, get curious, and before the next time you go helmet shopping, you should know all about the safety certifications on helmets. It’s good to know not just what they mean but where the numbers and testing methods come from and how the regulatory agencies came to settle on those numbers and testing methods (or lack thereof).
Specifically, what do DOT ratings on our helmets mean? This video goes into all of the numbers. Just like an “LD50” rating on a potentially toxic substance, many studies found a 50 percent possibility of a skull fracture at 290G’s of peak acceleration. Trouble is, though, that the studies the DOT base their ratings on are between twenty and forty years old, and they have left a helmet’s failure criteria at 400G’s of peak acceleration.
A Snell helmet certification means the helmet fails if it allows the “head” to experience 300G’s of peak acceleration. Further, however, the Snell foundation tests a rotational load on helmets to see if, when properly secured, the helmet is able to roll off the head form. The foundation also tests the retention system (straps) for failure, and also the chin bar to be sure it does not collapse into a rider’s face. The shell of the helmet and the shield (or visor) are both tested for penetration, and the entire helmet is also exposed to a flame resistance test.
I could tell you all about how these tests differ from DOT testing, if DOT tested helmets. That’s the rub, folks: DOT does not do any testing. The Department leaves it up to the manufacturers to do their own testing and certify to the DOT that they have tested up to certain standards and that their helmets pass.
The fox insists the hen house is secure, everyone: he’s tested it.
The real lesson here is, buyer beware. Protect your noggin with a decent helmet made by a respected manufacturer. A cheap helmet, even with a DOT rating, could have a dangerously shatter-prone visor, or weak spots, or a chin bar that will collapse on impact with anything. Yikes.
We hope this gave you a bit of insight into helmets and to look carefully into your next helmet.
~And as always…
~Live Free Ride Hard~
Let AMERiders keep you up to date with information on How Safe Is Your Dot Helmet? Probably Not as Safe as You Might Think.
And as always don’t forget to send us your stories, pictures, and events for posting to GALLERY.AMERIDERS @ GMAIL.COM and we will post them for you. The more people that know about your event the better and we are offering free advertising. We would also love to hear about your rides and love to see those bikes so send those stories and pictures.